The series ‘ZEUS – SE’ is the middle series of cultivators. Designed to meet the needs of small tractors and land with a small transport width not exceeding 2.5m. This is about machines with hydraulic frame for working depth up to 22cm. Available in working widths of 3 to 4m and required horsepower from 90 to 120 horsepower respectively.
Cultivator for preparation with 4-rows of tines, dual cylinders, adjustable suspensions, leveling bars and eradicator tines (optional). The ZEUS series is equipped with tines of type S ‘MARATHON German origin within changing from 9 to 11cm. The particular construction in combination with the dual cylinder, allow to increase the speed on the field to 22 km / h without entanglements resulting in rapid and economic preparation.
Selection of double cylinder:
The two rows of rollers, the first of which has clockwise tines and the second counterclockwise, achieve excellent flattening and absolute soil leveling. Available in three versions cylinders BW, BC, XBC, for normal, hard and stony soils respectively.
The ZEUS has 6 active suspension cylinders with mechanical depth setting. The rollers move “up and down” with possibility to change the angle of inclination depending on the slope, so as to better reflect the scragginess of the field and to flatten.
Large Selection of Tines
The ZEUS is provided in the basic version with 4 rows German tines Marathon P22 type S, spaced 9-11cm, permit the preparation of the soil to a depth of 22cm. Also available in 3-different types of German plates:
32×12 height 48cm straight form
45×12 height 60cm format ‘S’
45×12 height 60cm straight form
High strength frame with dimensions 50×50 and 80X80. The horizontal hollow sections entangled through the transverse for stiffening the frame.
Extremely high strength threaded tower 2 – positions for tractors of 2-categories, Cat-2 and Cat-3. Models of series have welded ‘tower’ of 20mm thickness.
Working Width (m)
Transport Width (m)
Power Demand (hp)
Number of Tines
Are optional equipment that replaces the double cylinders and is ideal for wet & muddy soils. At the back of the cultivator, are mounted in th suspensions 2, 3 or 4 rows of treaded springs of 10mm.
Front Leveling Bars
Optional front leveling bar with depth adjustment and suspension with pressure springs to avoid overload. Combination with wheels working depth.
Wide range of eradicator tines for the disappearance of traces (lines) of the wheel of the tractor:
1. ETS..: The most suitable for rocky soils. They have pressure spring to avoid breakage in case of conflict with stones. Very easy depth adjustment with pins.
2. ΕΤ 40..: The most economical solution for small cultivators are the german reinforced vibrant 40X10 tines